Rod ends with maintenance

DESIGN FEATURES: Hydraulic welding end for light application produced in accordance with regulation ISO 12240-4, series E, type M, rod having a central pivot on the bottom m of the connector welding at 45°, needs relubricating from dimension 25. The housing is made of S355JR UNI EN 10025 steel.

FIELD OF APPLICATION Rod end for range of links of cylinders, normally applied to the bottom of the hydraulic cylinder and the piston rod ends.

FIELD OF APPLICATION Rod end for heavy application to be welded to the bottom of the hydraulic cylinders. Removable bearing.

DESIGN FEATURES Hydraulic welding rod end with similar characteristics to the TS...N type, differing in the bearing.ln fact this end was produced in accordance with CETOP - ISDO 12240-1 series W ( like the TAPR...CE type). Needs lubricating from dimension 20. Head produced in S355JR UNI EN 10025, with centrai join.

FIELD OF APPLICATION For hydraulic cylinders produced in accordance with CETOP and DIN 24333, DIN 24336 and ISO 6020/1, ISO 6022. With grease-nipple. Removable bearing.

FIELD OF APPLICATION: Heavy-duty rod end to be welded to the reed of the hydraulic cylinders. Dismountable bearing.

FIELD OF APPLICATION Rod end with a particular shape for hydraulic cylinders. The strong structure allows maximum wheel-bases of hitching with a maximum exploitation of the stroke.

FIELD OF APPLICATION: Particularly recommended for hydraulic cylinders, where our design allows maximum stroke lenght with minimum closed centers.

DESIGN FEATURES: Hydraulic end with an internally threaded connector, relubricated through a grease lubricator in the rod end and through the pivot. It is differs from the previous type because the connector is grooved so as to produce a locking device with two hexagonal screws, according to DIN 912.

FIELD OF APPLICATION: Same applications are the TAPR...N series but with the advantage that It guarantees better and greater fixing to the pivot thread.

FIELD OF APPLICATION: For cylinders made in accordance with CETOP RP 58 H, DIN 24333, DIN 24336, ISO 6020/1 and ISO 6022; can be used also for the other types.

FIELD OF APPLICATION: These are recommended for 160 bar hydraulic cylinders according to DIN 24554-150 6020/2.

FIELD OF APPLICATION: End recommended for application with high alternate loads and shock loads. Long registered thread.

FIELD OF APPLICATION: End recommended for application with high alternate loads and shock loads. Long registered thread.

FIELD OF APPLICATION: End recommended for application with high alternate loads and shock loads. Long registered thread.

FIELD OF APPLICATION: End recommended for application with high alternate loads and shock loads. Long registered thread.